The individual, 3D-printed bearing splint for the lower leg
Benefit from the advantages of digitalization and create positioning splints for the lower leg now online on the Mecuris Solution Platform (MSP). By creating the 3D-printed Mecuris NightSplint you save valuable manpower. In just 45 minutes, you have turned a scan into a finished Mecuris NightSplint printing file. Intuitively and without any previous knowledge of 3D technologies or 3D printing. To achieve this, we have adapted the digital tools precisely to this process and kept them deliberately straightforward. Thanks to the large selection of colors and designs, you can fulfil your customers' individual design wishes easily.
No more casting, no plaster storage, less material scrap and significantly less waste. And best of all, we take care of the 3D printing service and the necessary quality controls for you. Convince yourself now! It has never been so easy and inexpensive to get started in the digitalization of orthotics.
Register now and book a live training:
The digital workshop: From 3D scan to the 3D-printed bearing splint
A 3D scan of the user's leg is first created as a starting point - completely without a plaster cast. This not only saves time, but is also more pleasant for your customer.
Bearing splints: 100% individual, 100% consistent quality, 100% reproducible
The lower leg orthosis is planned in the digital orthotic workshop, within the web-based Mecuris Solution Platform (MSP). The workflow was defined together with CPOs and digitally translated by us. The selection of tools is deliberately kept lean so that you can get started immediately without extensive training. Thanks to millimetre-precise 3D printing, the splint is always printed with consistent quality and constant material thickness and is 100% reproducible. This saves you additional work in production and also when a customer needs a replacement quickly. Plaster casting and plaster storage are no longer necessary in the digital process.
This service provides you with an alternative production method for a splint, suitable whenever a good scan can be made together with the wearer. After all, our aim is always to make your work easier where it makes sense.
Advantages at a glance:
> Fast, intuitive, digital creation
> No plaster cast required
> Sustainability: Reduction of material scrap and waste
> Highest quality with constant material thickness
> Fast reproducibility with consistent quality
> Customizable in color & design
Register now and book a live training:
Advantages at a glance
> Individual adaptation to foot length, width and weight of the user
> Color and design element chooseable
> High energy return
> (salt) waterproof
> High wearing comfort
> Wearable barefoot, without cosmetic cover
> High acceptance thanks to individual customization together with the child
> Foot length (120-230 mm) and foot width (56-90 mm)
> Low built height (from 52 mm)
> Heel height: 0-10 mm
> Low weight (approx. 150 g at 120 mm)
> Approved up to 40 kg (DIN EN ISO 10328:2016 reduced load level)
> Low maintenance: no mechanics, no hydraulics
> Simple connection using pyramid adapter (with M8 screw)
Mecuris NightSplint: Over 100 design combinations
Get your customers actively involved in the design of the orthosis and fulfill individual design wishes in just a few clicks. Children in particular are enthusiastic and appreciate the feeling of being able to influence their care themselves. The unique look of the splint can also increase the wearer's acceptance of the orthosis. The designs can be easily defined online on the Mecuris Solution Platform (MSP).
Get a first glimpse:
All information about the night splint at a glance:
With the purchase of your NightSplint we spend 10 Euro.
It is our mission to help where help is needed urgently. Thanks to our cooperation with Handicap International, from now on 10 Euros from each product sold will go to aid projects for rehabilitation and orthopedic care for children and young people in Nepal....
The 3D printing process
The production of the finished print file is carried out in ISO-certified 3D printing centers in Germany. Polyamide is used as the starting material, which is fused into a bionic product geometry by means of selective laser sintering (SLS).
The digital workshop - MSP
CPOs configure the tailor-made orthosis via the Mecuris Solution Platform (MSP), in the digital orthosis workshop, in just a few steps. After registering for the orthotic workshop at the MSP, you will receive a brief personal introduction to the tools and can then get started straight away. Register now and test it out:
Opportunity of cooperation
This night splint has been realized in a cooperation project with ORTHO Technik Rummelsberg. Do you have a product idea that has the potential to be ready for the market and are looking for a suitable development partner? Please feel free to contact us!